Table of Contents
Advertisement
"TeraNavi" folder. TeraNavigator will launch.
Notes:
• If using Windows 2000 or 2000 Server, make sure that write-protection on the USB device is disabled before con-
necting it. To disable write-protection, slide the switch on the USB device toward the USB connector.
• If "Do you want to allow the following program to make changes to this computer ?" is displayed by Windows 8.1,
8 or Windows 7, click Yes. If "A program needs your permission to continue" is displayed by Windows Vista, click
Continue.
• With Mac OS, double-click the disk image "WS5000R2-XXX.dmg" (where "XXX" is the software version from the
USB device and double-click TeraNavigator.
• Disable your antivirus software firewall before continuing. You may not be able to install the software if antivi-
rus software or a software firewall are enabled. After you've finished setup, re-enable your firewall and antivirus
software.
3
Click Begin Installation. The wizard will guide you through installing NAS Navigator2.
4
Click Finish. NAS Navigator2 will open.
5
Right-click on your TeraStation's icon, then select Properties. On a Mac, click the TeraStation's icon while holding
down the control key, then select Configure.
8
Advertisement
Table of Contents
