Table of Contents
Advertisement
3
Enter the username and password, then press the Enter key. Windows Storage Server will open in the remote
desktop.
Note: The default username and password are "Administrator" and "password".
4
The error message (E30) will be displayed in Buffalo Dashboard.
5
Click Dismount Drive X (where "X" is the number of the failed drive).
6
When the message "Removal of the drive completed. " is displayed, click OK.
The status LED will stop flashing and glow steadily.
7
WS5600DR2, WS5400DR2, WS5200DR2: Open the front cover with the included key.
29
Advertisement
Table of Contents
