Table of Contents
Advertisement
Hard drive
NOTE:
The hard drive spare part kit includes a hard drive bracket, hard drive connector, and Mylar
cover.
Description
750-GB, 7200 rpm, without hard drive hardware kit
750-GB, 5400 rpm, without hard drive hardware kit
640-GB, 7200 rpm, without hard drive hardware kit
640-GB, 5400-rpm, without hard drive hardware kit, (replaced by 631161-001)
640-GB, 5400-rpm, without hard drive hardware kit, (replaces 611495-001)
500-GB, 7200-rpm, without hard drive hardware kit
500-GB, 5400-rpm, without hard drive hardware kit
320-GB, 7200-rpm, includes hard drive hardware kit
250-GB, 7200-rpm, includes hard drive hardware kit
Hard Drive Hardware Kit (includes hard drive bracket and hard drive screws)
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power cord.
4.
Remove the battery (see
Remove the hard drive:
1.
Position the computer with the front toward you.
38
Chapter 4 Removal and replacement procedures
Battery on page
36).
Spare part number
633252-001
634250-001
621046-001
611495-001
631161-001
634921-001
634638-001
584380-001
584379-001
584382-001
Advertisement
Table of Contents
