Table of Contents
Advertisement
RTC battery
Description
RTC battery (includes cable and double-sided tape)
Before removing the RTC battery, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power cord.
4.
Remove the battery (see
5.
Remove the memory cover (see
Remove the RTC battery:
1.
Disconnect the RTC battery cable (1) from the system board.
2.
Release the RTC battery (2) from the system board. (The RTC battery is attached to the system
board by double-sided tape.)
Reverse this procedure to install the RTC battery.
48
Chapter 4 Removal and replacement procedures
Battery on page
36).
Memory module on page
Spare part number
592965-001
41).
Advertisement
Table of Contents
