System Configuration menu
Select
Language
Virtualization Technology (select models only)
LAN Power Saving
Fan Always On
Action Keys Mode
Boot Options
Diagnostics menu
Select
Primary Hard Disk Self Test
Memory Test
74
Chapter 5 Setup Utility (BIOS)
To do this
Change the Setup Utility language.
Enable/disable the processor Virtualization Technology.
Enable/disable the LAN power saving. Reduces the power
consumption of the LAN controller.
Enabled/disable Fan Always On. When enabled, the
computer fan will always be on.
Enable/disable the Action Keys.
Set the following boot options:
●
POST Hot Key Delay (sec.)―Set the delay for the user to
press hotkeys in intervals of 5 seconds each (0, 5, 10,
15, 20).
●
Floppy Boot―Enable/disable boot from diskette.
●
Internal Network Adapter Boot―Enable/disable boot
from external Network Adapter.
●
Boot Order―Set the boot order for:
◦
Notebook Hard Drive
◦
USB Diskette on Key/USB Hard Disk
◦
USB CD/DVD ROM Drive
◦
USB Floppy
◦
Network Adapter
To do this
Run a comprehensive self-test on the hard drive.
Run a diagnostic test on the system memory.