Table of Contents
Advertisement
Power connector and cable
Description
Power connector and cable
Before removing the power connector and cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power cord.
4.
Remove the battery (see
5.
Remove the following components:
a.
Hard drive (see
b.
Top cover (see
c.
Keyboard (see
d.
Display assembly (see
e.
System board (see
Remove the power connector and cable:
1.
Turn the system board upside down, with the rear toward you.
2.
Disconnect the power connector and cable from the system board.
64
Chapter 4 Removal and replacement procedures
Battery on page
36).
Hard drive on page
38)
Top cover on page
49)
Keyboard on page
51)
Display assembly on page
System board on page
56)
60)
Spare part number
592967-001
Advertisement
Table of Contents
