Top Cover - HP Pavilion TX1000Z Maintenance And Service Manual

Release the display QuickPlay board (2) as far as the display QuickPlay board cable will allow.
32.
Disconnect the display QuickPlay board cable (3) from the display QuickPlay board.
33.
NOTE:
441122-001.
Remove the display QuickPlay board from the display enclosure.
34.
Reverse this procedure to reassemble and install the display assembly.

Top cover

Description
Top cover (includes TouchPad and TouchPad cable, caps lock light board and cable, and
top cover bumper pads)
Before removing the top cover, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power cord.
3.
Remove the battery (see
4.
Remove the following components:
5.
Hard drive (see
a.
WWAN module (see
b.
Optical drive (see
c.
Keyboard (see
d.
ENWW
The display QuickPlay board is available in using spare part number
Battery on page
Hard drive on page
WWAN module on page
Optical drive on page
Keyboard on page
36).
38)
40)
42)
47)
Component replacement procedures
Spare part number
441134-001
59