Switch Cover - HP Pavilion TX1000Z Maintenance And Service Manual

Switch cover

Description
Switch cover (includes display convertible hinge base cover)
Before removing the switch cover, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power cord.
3.
Remove the battery (see
4.
Remove the keyboard (see
5.
Remove the switch cover:
Turn the computer upside down, with the front toward you.
1.
Remove the four Phillips PM2.0×7.0 screws that secure the switch cover to the computer.
2.
Turn the computer display-side up, with the front toward you.
3.
Open the computer.
4.
50 Chapter 5 Removal and replacement procedures
Battery on page 36).
Keyboard on page 47.)
Spare part number
441135-001
ENWW