HP Pavilion TX1000Z Maintenance And Service Manual page 59

Disconnect the display assembly cables (2) and (3) from the system board.
7.
Turn the computer display-side up, with the front toward you.
8.
Open the computer.
9.
Remove the display convertible hinge cover (1).
10.
Remove the two Phillips PM2.5×6.0 screws (2) that secure the display assembly to the computer.
11.
Disconnect the display panel cable (3) from the system board.
12.
NOTE:
antenna cables move cleanly through the opening (1) in the computer.
54 Chapter 5 Removal and replacement procedures
As you remove the display assembly, be sure that the display cables and wireless
ENWW