Rtc Battery - HP Pavilion TX1000Z Maintenance And Service Manual

RTC battery

Description
RTC battery
Before removing the RTC battery, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power cord.
3.
Remove the battery (see
4.
Remove the following components:
5.
Hard drive (see
a.
Optical drive (see
b.
Keyboard (see
c.
Switch cover (see
d.
Display assembly (see
e.
Top cover (see
f.
Remove the RTC battery:
Use a non-conductive, flat-bladed tool to pry the RTC battery out of the socket.
▲
Reverse this procedure to install the RTC battery. Be sure the RTC battery is installed with the "+" sign
facing up.
62 Chapter 5 Removal and replacement procedures
Battery on page 36).
Hard drive on page 38)
Optical drive on page
Keyboard on page 47)
Switch cover on page
Display assembly on page
Top cover on page 59).
42)
50)
52)
Spare part number
412390-001
ENWW