Optical drive
NOTE:
The optical drive spare part kit includes an optical drive bezel and an optical drive bracket.
Description
Blu-ray ROM with LightScribe DVD±RW Super Multi Double-Layer Drive
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe
Before removing the optical drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the accessory cover (see
Remove the optical drive:
1.
Remove the Phillips PM2.5×4.0 screw (1) that secures the optical drive to the computer.
2.
Slide the optical drive (2) to the left to disconnect it from the system board.
3.
Remove the optical drive.
4.
If it is necessary to replace the optical drive bracket, remove the two Phillips PM2.0×4.0
screws (1) that secure the bracket to the optical drive.
52
Chapter 4 Removal and replacement procedures
Battery on page
43).
Hard drive on page
44).
Spare part number
603678-001
603677-001
ENWW