4.
When a confirmation prompt with your language selected is displayed, press the
5.
To save your change and exit Setup Utility, use the arrow keys to select Exit > Exit Saving
Changes, and then press the
Change goes into effect immediately.
Navigating and selecting in Setup Utility
Because Setup Utility is not Windows based, it does not support the TouchPad. Navigation and
selection are by keystroke.
To navigate Setup Utility:
●
Use the arrow keys to choose a menu or a menu item.
●
Use either the arrow keys or the
example an Enable/Disable field.
●
Press the
●
Press the
●
Press the
Displaying system information
Use Setup Utility to view the system time and date and information that identifies the computer.
To display the system information using Setup Utility:
NOTE:
If Setup Utility is running, begin at step 1. If Setup Utility is not running, begin at step 2.
1.
Open Setup Utility by turning on or restarting the computer. When the "Press the ESC key for
Startup Menu" appears, press the
– or –
Open Setup Utility by turning on or restarting the computer. When the "Press the ESC key for
Startup Menu" message appears, press the
f10
key.
2.
Select the Main menu.
3.
To exit Setup Utility without changing any settings, use the arrow keys to select Exit > Exit
Discarding Changes, and then press the
ENWW
enter
enter
key to select an item.
esc
key to close a text box or return to the menu display.
f1
key to display additional navigation and selection information.
key.
f5
or the
f6
keys to choose an item in a list or to toggle a field, for
f10
key.
esc
key. When the Startup Menu appears, press the
enter
key.
enter
key.
Using Setup Utility
91