HP Pavilion DV6-3030 Maintenance And Service Manual page 75

5. Release the wireless antenna cables from the clips built into the base enclosure (5).
CAUTION:
support the display assembly can result in damage to the display assembly and other
computer components.
6. Remove the three Phillips PM2.5×7.0 screws (1) that secure the display assembly to the computer.
7. Remove the display assembly (2).
NOTE:
assemblies. Refer to steps 13 through 17 for disassembly information for computer models
equipped with the TouchScreen display assembly.
8. If it is necessary to replace the display bezel or any of the traditional display assembly internal
components:
a. Remove the Mylar screw covers (1). The screw covers are included in the Display
Miscellaneous Kit, spare part number 603659-001.
b. Remove the two Phillips PM2.5×7.0 screws (2) that secure the display bezel to
the display assembly.
ENWW
Support the display assembly when removing the following screws. Failure to
Steps 8 through 12 apply to computer models equipped with traditional display
Component replacement procedures
67