Restoring Default Settings In Setup Utility; Exiting Setup Utility - HP Pavilion DV6-3030 Maintenance And Service Manual

Restoring default settings in Setup Utility

To restore Setup Utility default settings:
NOTE: If Setup Utility is running, begin at step 1. If Setup Utility is not running, begin at step 2.
1. Open Setup Utility by turning on or restarting the computer. When the "Press the ESC key for
Startup Menu" appears, press the
– or –
Open Setup Utility by turning on or restarting the computer. When the "Press the ESC key for
Startup Menu" message appears, press the
f10 key.
2. Use the arrow keys to select Exit > Load Setup Defaults, and then press the
3. When the Setup Confirmation appears, press the
4. To save your change and exit Setup Utility, use the arrow keys to select Exit > Exit Saving
Changes, and then press the
Setup Utility default settings go into effect when the computer restarts.
NOTE: Your password, security, and language settings are not changed when you restore the factory
default settings.

Exiting Setup Utility

Exit Setup Utility with or without saving changes.
●
To exit Setup Utility and save your changes from the current session:
If the Setup Utility menus are not visible, press the
arrow keys to select Exit > Exit Saving Changes, and then press the
●
To exit Setup Utility without saving your changes from the current session:
If the Setup Utility menus are not visible, press the
arrow keys to select Exit > Exit Discarding Changes, and then press the
After either choice, the computer restarts in Windows.
92 Chapter 5 Setup Utility (BIOS)
f10 key.
esc key. When the Startup Menu appears, press the
enter
enter key.
esc key to return to the menu display. Use the
esc key to return to the menu display. Use the
key.
enter
enter
enter key.
key.
key.
ENWW