ET-2200 Series Ethernet I/O Modules
Step 2: Configure the Ethernet Settings
Contact your Network Administrator to obtain the correct network configuration information for
the ET-2200 series modules (e.g., ET-2260 #1 and #2), such as the IP Address, Subnet Mask, and
Gateway details. Refer to
Step 3: Configure the I/O Pair connection on the Web Server
1. In the eSearch Utility, select ET-2260 #1 module and then click the "Web" button to launch the
browser program and connect to the web server.
2. Enter the password in the Login password field (the default password is "Admin"), and then
click the "Submit" button to display the configuration page.
Copyright © 2020 ICP DAS CO., Ltd. All Rights Reserved.
Section 3.3 "Configuring the Network Settings"
for more details.
Figure 5-1.2
Figure 5-1.3
-94 -