ICP DAS USA ET-2217CI User Manual page 134

ET-2200 Series Ethernet I/O Modules
Step 3
Double-click the name of the module to open the Configure Server (UDP) dialog box, and modify
the basic settings as necessary, e.g., the IP, Mask and Gateway addresses, and then click the "OK"
button to save the new settings.
Step 4
Reset the Init/Run switch on the ET-2200 module
to the "Run" position and reboot the device.
Step 5
Log in to the web configuration pages for the ET-2200 module, using the default web password,
"Admin".
Copyright © 2020 ICP DAS CO., Ltd. All Rights Reserved. -134 -