Connectors - Axis Q3517-SLVE User Manual

Hide thumbs Also See for Q3517-SLVE:
Table of Contents

Advertisement

AXIS Q3517-SLVE Network Camera
Specifications
Connecting to an AXIS Video Hosting System service. To connect, press and hold the button for about 3 seconds until the
status LED flashes green.
Function Button
The function button has multiple functions:
As leveling Assistant – This function helps to ensure the image is level. Press the button for about 2 seconds to start the
leveling assistant and press again to stop. The status LED (see ) and buzzer signal assist leveling of the image. The image is
level when the buzzer beeps continuously.
To view the Status LED – Press the button once to light up the Status LEDs. Press again to turn them off. The LEDs
will turn off automatically after 10 seconds.

Connectors

Network connector
RJ45 Ethernet connector with Power over Ethernet (PoE).
Audio connector
The Axis product has the following audio connectors:
Audio in (pink) – 3.5 mm input for a mono microphone, or a line-in mono signal.
Audio out (green) – 3.5 mm output for audio (line level) that can be connected to a public address (PA) system or an
active speaker with a built-in amplifier. We recommend to use a stereo connector for audio out.
For audio in, the left channel is used from a stereo signal.
3.5 mm audio connectors
Audio Input
Audio Output
I/O connector
Use the I/O connector with external devices in combination with, for example, motion detection, event triggering, and alarm
notifications. In addition to the 0 V DC reference point and power (DC output), the I/O connector provides the interface to:
Digital input - For connecting devices that can toggle between an open and closed circuit, for example PIR sensors, door/window
contacts, and glass break detectors.
Supervised input - Enables possibility to detect tampering on a digital input.
Digital output - For connecting external devices such as relays and LEDs. Connected devices can be activated by the VAPIX®
Application Programming Interface or from the product's webpage.
4-pin terminal block
1 Tip
Microphone/Line in
Line out, mono
2 Ring
Microphone bias voltage
Line out, mono
24
3 Sleeve
Ground
Ground

Advertisement

Table of Contents
loading

Table of Contents