AXIS Q35 Series About this manual About this manual This user manual describes multiple products. Some of the instructions may not be relevant for your product.
AXIS Q3517-LV Network connector Control button I/O connector Audio out Audio in DC connector SD card slot Status LED (2x) Function button 10 IR LED (2x) AXIS Q3517-LVE, AXIS Q3527-LVE Network connector Control button I/O connector Audio out Audio in...
Page 6
AXIS Q35 Series Product overview DC connector SD card slot Status LED (2x) Function button 10 Heater 11 IR LED (2x) CAUTION The heater may be hot.
Setup Find the device on the network To find Axis devices on the network and assign them IP addresses in Windows®, use AXIS IP Utility or AXIS Device Manager. Both applications are free and can be downloaded from axis.com/support For more information about how to find and assign IP addresses, see the document How to assign an IP address and access your device on the device page at axis.com...
Image quality About capture modes Capture mode defines the maximum frame rate available in the Axis product. Depending on which capture mode you select, you may not be able to use WDR. A capture mode consists of a resolution and the corresponding frame rate available in the product. The capture mode setting affects the camera’s field of view and aspect ratio.
Page 9
AXIS Q35 Series Setup Left: no focus. Right: remote focus applied. Left: no zoom. Right: remote zoom applied. How to straighten image Straighten image straightens the image horizontally by rotating and cropping it digitally. Due to the cropping, a part of the original image is lost.
Page 10
AXIS Q35 Series Setup 1. Go to Settings > Image > Image correction. 2. Enable Straighten image. How to hide parts of the image with privacy masks What is a privacy mask? A privacy mask is a user-defined area that prevents users from viewing a part of the monitored area. In the video stream, privacy masks appear as blocks of solid color or blurred image elements.
Page 11
1. Go to Settings > Image. 2. Turn on WDR under Wide dynamic range. Image without WDR. Image with WDR. Note WDR may cause artifacts in the image. Find out more about WDR and how to use it at axis.com/web-articles/wdr...
8. To position the text overlay, choose Custom or one of the presets. Create an action rule: 9. Go to System > Events > Action rules. 10. Create an action rule with AXIS Video Motion Detection as trigger. 11. From the list of actions, select Overlay text. 12. Type “Motion detected”.
Page 13
H.264 or MPEG-4 Part 10/AVC Note H.264 is a licensed technology. The Axis product includes one H.264 viewing client license. Installing additional unlicensed copies of the client is prohibited. To purchase additional licenses, contact your Axis reseller. H.264 can, without compromising image quality, reduce the size of a digital video file by more than 80% compared to the Motion JPEG format and by as much as 50% compared to the MPEG-4 standard.
4. Go to Settings > System > Events and add an action rule. 5. Type a name for the action rule. 6. From the list of triggers, select Applications and then select AXIS Video Motion Detection (VMD). 7. From the list of actions, select Record video.
Applications About applications AXIS Camera Application Platform (ACAP) is an open platform that enables third parties to develop analytics and other applications for Axis products. To find out more about available applications, downloads, trials and licenses, go to axis.com/applications To find the user manuals for Axis applications, go to axis.com Note •...
AXIS Q35 Series Troubleshooting Troubleshooting If you can’t find what you’re looking for here, try the troubleshooting section at axis.com/support How to reset to factory default settings Important Reset to factory default should be used with caution. A reset to factory default resets all settings, including the IP address, to the factory default values.
Axis product. Check all cabling and reinstall the product. Possible IP address conflict The static IP address in the Axis product is used before the DHCP server sets a dynamic address. with another device on the...
Heavy network utilization due to poor infrastructure affects the bandwidth. • Viewing on poorly performing client computers lowers perceived performance and affects frame rate. • Running multiple AXIS Camera Application Platform (ACAP) applications simultaneously may affect the frame rate and the general performance.
AXIS Q35 Series Specifications Specifications To find the latest version of the product’s datasheet, go to the product page at axis.com and locate Support & Documentation. LED Indicators Note • The Status LED can be configured to flash while an event is active.
AXIS Q35 Series Specifications • Connecting to an AXIS Video Hosting System service. To connect, press and hold the button for about 3 seconds until the status LED flashes green. Function Button The function button has multiple functions: • As leveling Assistant – This function helps to ensure the image is level. Press the button for about 2 seconds to start the leveling assistant and press again to stop.
Page 21
AXIS Q35 Series Specifications Function Notes Specifications DC ground 0 V DC DC output Can be used to power auxiliary equipment. 12 V DC Note: This pin can only be used as power out. Max load = 50 mA 3–4 Configurable Digital input or Supervised input –...