AXIS M4216-LV Dome Camera
Specifications
Buttons
Control button
The control button is used for:
•
Resetting the product to factory default settings. See Reset to factory default settings on page 60.
•
Connecting to a one-click cloud connection (O3C) service over the internet. To connect, press and hold the button
for about 3 seconds until the status LED flashes green.
Power button
•
Press and hold the power button to temporarily power the product when the dome cover is removed.
•
The power button is also used with the control button to reset the camera to factory default settings. See page 60.
Connectors
HDMI connector
TM
Use the HDMI
connector to connect a display or public view monitor.
Network connector
RJ45 Ethernet connector with Power over Ethernet (PoE).
58