Wireless Button Board - HP PAVILION 311 Maintenance And Service Manual

Wireless button board

Description
Wireless button board (includes cable)
Before removing the wireless button board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the accessory compartment cover (see
6. Remove the hard drive (see
7. Remove the keyboard (see
8. Remove the top cover (see
Remove the wireless button board:
1. Turn the top cover upside down, with the front toward you.
2. Remove the Phillips PM2.0×4.0 screw 1 that secures the wireless button board to the top cover.
3. Remove the wireless button board 2.
Reverse this procedure to install the wireless button board.
Maintenance and Service Guide
"Battery" on page 4-7).
"WLAN module" on page
"Hard drive" on page
"Keyboard" on page 4-21).
"Top cover" on page 4-24).
4-18).
Removal and replacement procedures
Spare part number
580060-001
4-9).
4–27