Led Settings; Country Settings; Ddp Control Settings; Nuclias Connect Settings - D-Link NUCLIAS CONNECT DAP-3666 User Manual

Web User Interface
LED Status
Click the radio button to select the LED on or off.
Note: To save the new configuration settings to the firmware, click
Configuration > Save and Activate, otherwise click Discard Changes to
delete any setting change.
Select a Country
Click the drop-down menu to select a country.
Note: To save the new configuration settings to the firmware, click
Configuration > Save and Activate, otherwise click Discard Changes to
delete any setting change.
Status Check the box to enable the DDP control
setting.
Note: To save the new configuration settings to the firmware, click
Configuration > Save and Activate, otherwise click Discard Changes to
delete any setting change.
The Nuclias Connect section is used to create a set of APs on the Internet to be organized into a single group in order to increase ease of
management. Nuclias Connect and AP Array are mutually exclusive functions.
Enable Nuclias Connect Click the drop-down menu to enable or disable
the Nuclias Connect.
Note: To save the new configuration settings to the firmware, click
Configuration > Save and Activate, otherwise click Discard Changes to
delete any setting change.
D-Link DAP-3666 User Manual

LED Settings

Country Settings

DDP Control Settings

Nuclias Connect Settings

89