Intrusion - D-Link NUCLIAS CONNECT DAP-3666 User Manual

Web User Interface
The Wireless Intrusion Protection window is used to classify APs as Valid, Neighborhood, Rogue, or a New group.
Wireless Band Click the drop-down menu to select the wireless
band, 2.4GHz or 5GHz.
Detect Click Detect to initiate a scan of the network.
AP List Click the drop-down menu to select All, Valid,
Neighbor, Rogue, and New.
The following is a definition of the listed AP
categories:
y Valid: An AP which is authenticated to the network
with encryption is classified as valid.
y Neighbor: A detected AP with a weak signal
strength is classified as a suspect neighbor.
y Rogue: An AP that has been installed on the
secure network with out explicit authorization.
y New: An alternative category.
From the AP List select a detected AP and click
Set as Valid, Set as Neighborhood, Set as
Rogue, or Set as New to manually define the
category type for the AP. Alternatively, click the
radio button to mark all new access points as
valid or rogue.
Save Click to save the updated configuration.
To make the updates permanent, click
Configuration > Save and Activate.
D-Link DAP-3666 User Manual

Intrusion

41