D-Link NUCLIAS CONNECT DAP-3666 User Manual page 98

Troubleshooting
The wireless client cannot access the Internet within Infrastructure mode.
Make sure the wireless client is associated and joined with the correct access point. To check this connection, right-click on the Local Area
Connection icon in the taskbar and select View Available Wireless Networks. The Connect to Wireless Network screen will appear. Please make
sure you have selected the correct available network, as shown in the illustrations below.
y Check that the IP address assigned to the wireless adapter is within the same IP address range as the access point and gateway. Since the
DAP-3666 has an IP address of 192.168.0.50, wireless adapters must have an IP address in the same range, e.g. 192.168.0.x. Each device must
have a unique IP address; there may be no two devices with the same IP address. The subnet mask must be the same for all the computers on
the network. To check the IP address assigned to the wireless adapter, double-click the Local Area Connection icon in the taskbar, then select
the Support tab and the IP address will be displayed.
y If it is necessary, assign a Static IP Address to the wireless adapter. If you are entering a DNS Server address, you must also enter the Default
Gateway Address. Remember that if you have a DHCP-capable router, you will not need to assign a static IP address.
D-Link DAP-3666 User Manual 98