D-Link NUCLIAS CONNECT DAP-3666 User Manual page 16

Web User Interface
Channel Width Click the drop-down menu to select 20 MHz, Auto 20/40 MHz or Auto 20/40/80 MHz. Select 20 MHz if you are not using any
802.11n wireless clients. Auto 20/40 MHz allows you to connect to both 802.11n and 802.11b/g or 802.11a wireless devices on
your network.
Authentication Click the drop-down menu to select Open System, Shared Key, WPA-Personal, WPA-EAP, or 802.1X.
y Select Open System to communicate the key across the network (WEP).
y Select Shared Key to limit communication to only those devices that share the same WEP settings. If multi-SSID is enabled,
this option is not available.
y Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required.
y Select WPA-EAP to secure your network with the inclusion of a RADIUS server.
y Select 802.1X if your network is using port-based Network Access Control.
802.11k/v/r
Use the drop-down menu to choose to enable or disable 802.11k/v/r
Save Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate.
D-Link DAP-3666 User Manual 16