Outputs - User Option - Honeywell Notifier ID60 Series Operating Manual

ID50 Series Panel - Operating Manual

4.9.5 Outputs - User Option

The Test Outputs option, accessed from the Test Menu, tests
the panel's internal sounder and relay circuits and the Signalling
Line Circuit (SLC) loop outputs. To perform this test:
Test Internal Outputs
[U0 Test]
4:Auto High Test
1 From the Test Menu, press the '
numeric keypad to select the Outputs option.
[U0 Outputs]
2 Press the '
the Internal Test menu.
[Internal Test]
: Start
3 Use the '
required for testing and press the '
the test. The LCD then displays the following:
[Internal Test]
Output test in progress
4 Check that the output operates. To stop the test, press
the '
4
to the Test Outputs menu.
Test SLC Outputs
[U0 Outputs]
1 From the Outputs menu, press the '
numeric keypad to display the SLC Output Test menu:
[SLC Test]
: Start
2 Use the '
for testing and press the '
The LCD then displays the following:
[SLC Test]
Output test in progress
3 Check that the output operates. To stop the test, press
the '
4
to the Test Outputs menu.
25
1:LEDs 2:LCD 3:Zones
5:Outputs
1:Internal
3: Loop Power
' button on the numeric keypad to display
1
B:01 SDR
: Change Output
/ ' buttons to select the internal output
2 8
B:01 SDR
' button. Press the ' ' button again to return
4
1:Internal
3: Loop Power
M:nn SDR
: Change Output
/ ' buttons to select the output required
2 8
' button to start the test.
5
M:nn SDR
' button. Press the ' ' button again to return
4
997-264-000-10, Issue 10
: More
' button on the
5
2:SLC
<:Exit
' button to start
5
<:Stop
2:SLC
' button on the
2
<:Exit
<:Stop
January 2010