Clock - User Option - Honeywell Notifier ID60 Series Operating Manual

3
997-264-000-10, Issue 10
January 2010
ID50 Series Panel - Operating Manual

4.11 Clock - User Option

The CLOCK User Option allows the user to enter or edit
the following:
a. Time.
b. Date.
To edit the CLOCK - User Option:
1 At the 'Status: NORMAL' message, press the '
button. The LCD prompts for a Level 2/3 access code.
ACCESS TO MENUS RESTRICTED
Enter Level 2/3 Passcode: . . . .
Note: If an incorrect access code is entered, the LCD
displays
PASSCODE ! ! !'. After one minute the LCD returns
to the 'Status: NORMAL' message.
5
2 Either turn the keyswitch or, using the numeric keypad,
enter the correct Level 2 access code and confirm
using the '
with the user number ([U0] to [U9]) in the top left-hand
corner.
[U0] 1 : Test
4 : View Mode
3 Press the '
the Clock menu.
[U0 Clock]
34
an 'ERROR
' button. The Level 2 menu is displayed
5
2 : Disable/Enable 3 : Clock
5 : Commission
' button on the numeric keypad to select
3
1 : Time 2 : Date
'
< : BackSp
- INCORRECT