Leds - User Option; Lcd - User Option - Honeywell Notifier ID60 Series Operating Manual

ID50 Series Panel - Operating Manual

4.9.1 LEDs - User Option

1
[U0] 1 : Test
[U0 Test]
1

4.9.2 LCD - User Option

1
[U0] 1 : Test
[U0 Test]
2
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ
ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ
This option, selected from the Test menu, illuminates each
LED in turn. To test the panel LEDs, enter access Level 2
and follow the procedure below:
1 Using the numeric keypad, press '
TEST menu.
2 : Disable/Enable
4 : View Mode 5 : Commission
2 To test LEDs, press the '
keypad.
1:LEDs 2:LCD
4:Auto High Test
3 Each of the panel LEDs illuminates in turn while the
LCD flashes the message shown below. When all
LEDs have been tested, press the '
cancel and return to the Test menu.
TESTING LEDs ! ! !
The LCD Option, selected from the Test menu, tests the
LCD by displaying each upper case character in turn. To
test the LCD, enter access Level 2 and follow the
procedure below.
1 Using the numeric keypad, press '
TEST menu.
2 : Disable/Enable
4 : View Mode 5 : Commission
2 To test the LCD, press the '
keypad.
1:LEDs 2:LCD
4:Auto High Test
3 Each character is then displayed in turn on the LCD.
When all characters have been displayed, press the
' ' button to cancel and return to the Test Menu.
4
21
' to display the
1
3 : Clock
' button on the numeric
1
3:Zones
5:Outputs : More
' button to
4
' to display the
1
3 : Clock
' button on the numeric
2
3:Zones
5:Outputs : More
997-264-000-10, Issue 10
January 2010