Honeywell Notifier ID60 Series Operating Manual page 49
Hide thumbs
Also See for Notifier ID60 Series:
Table of Contents
Advertisement
ID50 Series Panel - Operating Manual
Where no history exists
for a selected print
option, the option will
not be selectable.
2
3 Select the appropriate print option from the Log menu
using the appropriate numeric key. You are prompted
to enter the dates of the event log period you wish to
print. Use the numeric keypad to enter the dates, press
the '
' to confirm the date entered. If you make a
5
mistake, edit the date using the '
press the '
' button.
5
Enter date rang,e (dd/mm/yy)
-- /-- / -- to -- /-- /--
4 The display now changes to indicate that printing is
taking place as follows:
Printing Event Log
5 If the event log is being printed to a PC, the data can
be saved as a .csv (comma separated values Excel)
file for archiving purposes.
Note: The ID5x/6x Series offline configuration tool has
an option (under the Tools menu) to allow event or
device data to be retrieved from the panel and
saved on the PC.
6 To print the disablements, press the '
the Print screen:
[U0 PRINT DISABLEMENTS]
2 : Zone
7 Select the appropriate option using the numeric
keypad. If disabled device data is available the print
screen changes to advise that printing is taking place.
For example, if option 2 Zone is selected the following
information is displayed:
Printing Zone Disablements
8 To print the maintenance log (ID60 only), press the
'
' button. The display changes to indicate that
3
printing is in progress, as below:
Printing Maintenance Log
Note: The Maintenance log can hold up to 100 log
entries. Newer entries replace the oldest in the log.
9 Press the
' button to cancel printing and return to
4
the Print menu.
45
' button and then
4
: All
<: Cancel
< : Stop
' button at
2
1 : Device
3 : Outputs
< : Stop
997-264-000-10, Issue 10
January 2010
Advertisement
Table of Contents
