System Log Displays - Panasonic AW-HR140 Operating Instruction

System log displays

NTP-related error displays
Category Display
Connection error No response from the NTP server.
Internal error Undefined error.
Successful NTP update succeeded.
NTP-based time
synchronization
HTTPS-related log displays
Category Display
HTTPS Self-signed Certificate - Generated
Self-signed Certificate - Deleted
Certificate Signing Request - Generated
CA Certificate - Installed
CA Certificate - Deleted
Previous CRT key - Applied
CRT key - Generated
Login-related displays
Category Display
Login (User name or IP address)
Displays related to access commands
Category Display
Image transmission jpeg ch [No.]
demand Play [User name] and [IP address]
jpeg Stop [User name] and [IP address]
mjpeg ch [No]
Play [User name] and [IP address]
h264 ch [No.]
Play [User name] and [IP address]
h264 ch [No.]
Stop [User name] and [IP address]
Audio transmission audio Play [User name] and [IP address]
demand
audio Stop [User name] and [IP address]
Other CGI [CGI command], [User name] and [IP address] • Displays the user name and IP address of the user that logged into this unit
commands
Description
• The IP address of the server may be incorrect.
Check the server's IP address settings again.
• The NTP server may be down.
Consult your server administrator.
• A problem has occurred in the NTP function. Check the NTP settings again.
• The time has been updated successfully.
Description
• Generation of the self-signed certificate is complete.
• Deletion of the self-signed certificate is complete.
• Generation of the certificate signing request is complete.
• Installation of the server certificate is complete.
• Deletion of the server certificate is complete.
• The previous CRT key has been applied as the CRT key.
• Generation of the CRT key is complete.
Description
• If user authentication has been set, the name of the user who has logged
onto the unit is displayed.
• If host authentication has been set, the IP address of the user who has
logged onto the unit is displayed.
Description
• Displays the user name and IP address of the user that logged into this unit
and made a JPEG transmission play demand.
• Displays the user name and IP address of the user that logged into this unit
and made a JPEG transmission stop demand.
• Displays the user name and IP address of the user that logged into this unit
and made a MJPEG transmission play demand.
• Displays the user name and IP address of the user that logged into this unit
and made a h264 transmission play demand.
• Displays the user name and IP address of the user that logged into this unit
and made a h264 transmission stop demand.
• Displays the user name and IP address of the user that logged into this unit
and made an audio transmission play demand.
• Displays the user name and IP address of the user that logged into this unit
and made a audio transmission stop demand.
and ran a specific CGI command.
However, a display will not occur each time a CGI command is run.
106