Table of Contents
Advertisement
Camera menu items (continued)
When 50 Hz has been set as the unit's frequency:
When [Step] is
selected as the
[Shutter Mode]
For 50p/50i
1/60, 1/120, 1/250,
1/500, 1/1000, 1/2000,
1/4000, 1/10000
For 25p
1/25, 1/60, 1/120, 1/250,
1/500, 1/1000, 1/2000,
1/4000, 1/10000
<NOTE>
• When [Shutter Mode] is set to [Off] in 29.97P, 23.98P, or 25P mode,
the shutter speed is set to [1/50].
• If the intelligent function is enabled, the shutter setting will be
disabled.
Gain
[(When Super Gain is Off) Auto, 0dB to 36dB, (When Super
Gain is On) Auto, 0dB to 42dB]
The image gain is adjusted here.
In locations which are too dark, adjust the gain upward; conversely, in
locations which are too bright, adjust it downward.
When [Auto] is set, the light quantity is adjusted automatically.
The noise increases when the gain is increased.
<NOTE>
• [Gain] cannot be set to [Auto] when [Frame Mix] is set to [18dB] or
[24dB].
• If the intelligent function is enabled, the [Gain] setting will be
disabled.
Super Gain [Off, On]
Set the super gain (increased sensitivity) mode.
Off
Do not set super gain mode.
On
Set super gain mode.
AGC Max Gain [6dB, 12dB, 18dB]
When [Auto] is selected as the [Gain] setting, the maximum gain-up
amount can be set.
Frame Mix [Off, 6dB, 12dB, 18dB, 24dB]
Select for frame addition (gain-up using sensor storage) amount.
When frame addition is performed, it will appear as if the images are
missing some frames.
This cannot be configured when the format is 1080/29.97p,
1080/23.98p, 1080/29.97PsF, 1080/23.98PsF, 1080/25p, or
1080/25PsF.
[Frame Mix] cannot be set to [18dB] or [24dB] when [Iris Mode],
[Gain], or [Focus Mode] is set to [Auto]. (When setting [Frame Mix] to
[18dB] or [24dB], set [Iris Mode] and [Focus Mode] to [Manual] and
set [Gain] to any setting other than [Auto]. )
<NOTE>
• Under discharge tube illumination, such as fluorescent and mercury-
vapor lights, the brightness may change synchronously, colors may
change, and horizontal stripes may flow up and down the image.
In such cases, we recommend setting the electronic shutter speed
to 1/100 in regions with 50 Hz power supply frequency, and to OFF
in regions with 60 Hz power supply frequency.
• If the intelligent function is enabled, the [Frame Mix] setting will be
disabled.
ND Filter [Through, 1/8, 1/64]
When [Synchro]
is selected as the
[Shutter Mode]
50.15Hz to 535.71Hz
(255 steps)
Return
Brightness 2/2 screen
Day/Night [Day, Night]
Return
40
Set the transmittance of the lensʼ built-in ND (neutral density) filter.
The filter switches when the setting is fixed.
Through
Do not set ND filter.
1/8
Set ND filter transmittance to 1/8.
1/64
Set ND filter transmittance to 1/64.
<NOTE>
• If the intelligent function is enabled, the [ND Filter] setting will be
disabled.
Return to the previous menu level.
B r i g h t n e s s 2 / 2
D a y / N i g h t
R e t u r n
Switch between standard shooting and night-vision shooting (shooting
with infrared light).
Day
Standard shooting (day mode)
Night
Night-vision shooting (night mode)
<NOTE>
• In night mode, video output will be in black and white. In addition,
the iris will be forcibly opened.
• White balance adjustment is not possible in night mode.
• ND filter switching is not possible in night mode.
• Pedestal adjustment is not possible in night mode.
• In night mode, the intelligent function does not operate.
Return to the previous menu level.
D a y
Advertisement
Table of Contents
