Digital Electronic Image Stabilization System.31; Negative/Positive Transposer.31 - Panasonic Palmcorder PV-D407 Operating Instructions Manual

Special Features
Digital Electronic Image
Stabilization System
Before you begin...
• Set the POWER switch to CAMERA.
This feature helps stabilize the picture in
situations such as walking or shooting from
a moving vehicle.
1
Press the EIS button to activate the
Digital E.I.S. function. ("EIS" will
appear in the EVF.)
• The image in the EVF will be
enlarged slightly and the shutter
speed will automatically adjust from
1/80 to 1/250 according to the
brightness of the subject.
Press the EIS button again to cancel.
• You may also use the High Speed
Shutter function (from 1/100 to 1/
10000). The shutter speed you select
remains active even after you cancel
the Digital E.I.S. function.
• Be sure that the Digital E.I.S. is
turned off when not in use.
Digital E.I.S. may not function
when...
• Palmcorder movement is too ex¬
treme.
• recording a subject with distinct
horizontal or vertical stripes.
• recording in low light situations.
• EIS indicator flashes when the light
level is inadequate.
• recording a subject under intense
fluorescent light.
• recording a scene with very fast
motions.
Negative!Positive Transposer
This special effect feature allows you to change
the picture from a positive to a negative image.
Before you begin...
• Set the POWER switch to CAMERA.
Press NEG/POS to view or record a
negative image.
Press again for normal recording.
31