Operations On The Aw-Rp120 Remote Camera Controller - Panasonic AW-HR140 Operating Instruction

Basic setup operations (continued)

Operations on the AW-RP120 Remote Camera Controller

Camera menu operation
„ z
1.
Press the appropriate <CAMERA SELECT/GROUP
SELECT> button (<1> to <10>) to select the unit you want
to operate.
2.
Press and hold the <CAMERA OSD> button on the
AW-RP120 for about 2 seconds.
The AW-HR140 camera menu appears on the monitor.
3.
Turn the <F1> dial to select an AW-HR140 camera menu
item or to change a setting value.
Turn the <F1> dial to move the cursor up and down or to change
setting values.
Press the <F1> dial to move to the next level of a menu item or to
change a blinking setting value at the lowest level.
4.
To exit the camera menu, press and hold the <CAMERA
OSD> button for about 2 seconds.
Switching between day and night mode
„ z
1. Press the <MENU> button on the AW-RP120.
The <MENU> button lights.
2.
Press the FUNCTION menu <23> button.
The button lights, and the [OPTION] menu appears on the LCD panel.
3.
Turn the <F1> dial to select [FUNCTION], then press the
<F1> dial.
4.
Turn the <F1> dial to select [OPTION].
[Off] or [On] appears on the bottom right (F2 area) of the LCD panel.
5.
Turn the <F2> dial to select [Off] or [On], then press the
<F2> dial.
Off: Day mode
On: Night mode
Selects a camera to be operated.
Color temperature setting (COLOR TEMP)
„ z
1.
Press the <EXIT> button and the <ATW> button of
<WHITE BAL> simultaneously.
The <A>, <B>, <ATW> buttons of <WHITE BAL> light, and color
temperature setting mode is enabled.
The color temperature setting value appears on the LCD screen
during this time.
2.
Turn the <F1> dial to change the color temperature.
Press the <A>, <B>, and <ATW> buttons of <WHITE BAL> to return
to the mode of the selected button.
The mode will switch from the color temperature mode to the original
mode after a specific amount of time passes. To configure the color
temperature setting again, press the <EXIT> button and the <ATW>
button of <WHITE BAL> simultaneously.
Preset speed table setting (PRESET SPEED)
„ z
1.
Press the <MENU> button on the AW-RP120.
The <MENU> button lights.
2. Press the FUNCTION menu <23> button.
The button lights, and the [OPTION] menu appears on the LCD panel.
3.
Turn the <F1> dial to select [PRESET SPEED], then press
the <F1> dial.
[Slow] or [Fast] appears on the bottom right (F2 area) of the LCD
panel.
4.
Turn the <F2> dial to select [Slow] or [Fast], then press
the <F2> dial.
33
For operating the camera menus.
CAMERA OSD:
When this is pressed for 2
seconds, the selected camera
menu is displayed, overlapping
the camera output image. When
it is pressed for 2 seconds while
a camera menu is displayed, the
menu is exited.
F1: Turn to move the cursor up and
down in the camera menu or to
change setting values. Press to
move to the next level of a menu
item or to change a setting value
at the lowest level.