Usb Board - HP G62-373 Maintenance And Service Manual

USB board

Description
USB board
Before removing the USB board:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then
disconnecting the AC adapter from the computer.
4. Remove the battery (see
5. Remove the hard drive (see
6. Remove the memory module (see
7. Remove the wireless module (see
8. Remove the optical drive (see
9. Remove the keyboard (see
10. Remove the top cover (see
11. Remove the display assembly (see
Remove the USB board:
1. Disconnect the USB board cable 1 from the system board.
2. Remove the Phillips PM2.5×60 screw 2 from the system board.
3. Lift the USB board 3 straight up to remove it from the computer. The USB cable is available with the cable kit
using spare part number 595201-001
Reverse this procedure to install a USB board.
Maintenance and Service Guide
"Battery" on page 4-7).
"Hard drive" on page
"Memory module" on page
"Wireless module" on page
"Optical drive" on page
"Keyboard" on page 4-17).
"Top cover" on page
"Display assembly" on page
4-8).
4-10).
4-12).
4-14).
4-20).
4-26).
Removal and replacement procedures
Spare part number
595205-001
4–33