Removal and replacement procedures
Remove the keyboard:
1. Turn the computer upside down, with the front toward you.
2. Remove the three Phillips PM2.5×5.0 and three Phillips PM2.5x6.5 screws that secure the keyboard to the
computer.
3. Turn the computer right-side up, with the front toward you.
4. Open the computer as far as possible.
5. Release the tabs along the left 1 and right 2 edges of the keyboard using a thin flat-bladed screwdriver.
6. Lift the rear edge of the keyboard 3, and set the keyboard back towards the display 4.
4–18
Maintenance and Service Guide