Rinnai M060C Installation And Operation Manual page 78

To follow is an example of how to adjust parameters on the M-Series Boiler.
Change the Altitude
1
From the controller Home screen, press
the BACK and OK buttons at the same
time for 7 seconds.
Home
screen
2
Turn the selector wheel so that 007
appears as the technical code.
The "007" Menu is where all parameters can be
adjusted.
78
3
Turn the selector wheel to highlight
Complete Menu. Press OK.
All commonly adjusted parameters can be
accessed in the Complete Menu.
4
Turn the selector wheel to highlight
2 Boiler Parameters. Press OK.
The first digit shown is the first value in the
parameter address in the table to follow.
Rinnai M-Series Condensing Boiler Combi Manual