Peco TW206 Owner's Manual page 15

Setting the Clock & Day
. Press PROGRAM once.
2. Press ▲or ▼to scroll until "CLOCK" is blinking. To select, press PROGRAM once.
3. Press ▲or ▼to scroll through "24Hr", "AM", "PM" options. "24Hr" sets your thermostat to a 24-
hour clock. "AM" and "PM" sets your thermostat to a 12-hour clock. To select your preference,
press PROGRAM once.
4. Press ▲or ▼to scroll to the current hour. To select, press PROGRAM once.
5. Press ▲or ▼to scroll to the current minute. To select, press PROGRAM once.
6. Press ▲or ▼to scroll to the current day. To select, press PROGRAM once.
Your selections have been saved and you have exited program mode. Your thermostat is ready
to function with the factory preprogrammed ENERGY STAR program. If you want to change the
program for your particular needs, follow the instructions in the "Programming Your Thermostat"
section.
Setting the Temperature Display
. Press PROGRAM once.
2. Press ▲or ▼to scroll until "°F °C" is blinking. To select, press PROGRAM once.
3. Both "°F" and "°C" will be lit, but only one will be blinking. Press ▲or ▼to scroll so that the
preferred option is blinking. To select, press PROGRAM once.
Your selection has been saved and you have exited program mode.
6