Smeg SOP6102S2PN Manual page 41

2. Open the door and pull the filling drawer
out of its housing.
3. Insert the funnel provided in the filling
drawer.
4. Pour the descaling solution until the max.
level indicator light comes on
reservoir contains about 800 ml of water).
914779671/D
5. At the end, remove the funnel and place the
filling drawer back in its place.
If there is too much water in the
reservoir, the excess water will drain
into the oven cavity. In this case dry with
a cloth or sponge before proceeding.
Water circuit cleaning function
1. Close the door
2. Press the
3. Water circuit cleaning starts.
(the
Each time the door is opened, the
function in progress stops and then
automatically restarts when the door is
closed again.
When the cleaning process is complete, the
appliance sounds an acoustic signal. The
indicator light
request to drain water.
Reservoir draining
1. Open the door
2. Place the deep pan on the third shelf from
the bottom. Push it against the rear wall of
the oven cavity.
3. Press the
function.
The water starts to flow into the deep pan from
CLEANING AND MAINTENANCE - 95
button to start the function.
comes on to indicate the
button again to start the