Smeg SOP6102S2PN Manual page 26

1. After entering the special functions menu,
press the button until the
function is selected.
2. Press the button to confirm.
3. Press the button to start the function.
In this function it is not possible to skip
the preheating phase.
4. After preheating, open the door and place
the food to be cooked in the oven cavity.
5. Close the door.
6. Check the cooking status of the food by
turning on the internal light.
7. At the end of cooking, turn the function knob
to position 0 to exit the function.
STONE
Useful for on stone cooking. For use
with the PPR2 or STONE accessory
sold separately.
Please refer to the instructions and
recommendations for use described in
the accessory documentation.
1. Open the door.
2. Insert the PPR2 or STONE accessory in the
oven cavity (refer to the specific manual of
the accessory).
80 - USE
3. Close the door
4. After entering the special functions menu,
press the button until the
function is selected.
5. Press the button to confirm.
6. Turn the temperature knob to select the
required temperature (from 50°C to
280°C).
7. Press the button to start the function.
As with normal cooking functions, you
can skip pre-heating and set a timed
and programmed cooking.
8. After preheating, open the door and place
the food to be cooked on the accessory.
9. Close the door.
10. At the end of cooking, turn the function knob
to position 0 to exit the function.
BBQ (Barbecue)
Useful for barbecue cooking. For use
with the BBQ accessory sold
separately.
Please refer to the instructions and
recommendations for use described in
the accessory documentation.
1. Open the door.
914779671/D