Smeg SOP6102S2PN Manual page 17

Table of Contents

Advertisement

To delete a timed cooking
1. Press the
button for a few seconds.
2. Turn the temperature knob counter-
clockwise until the cooking time is reset.
3. Press the
button to confirm.
Programmed cooking
Programmed cooking is the function
which allows a time-controlled cooking
operation to be stopped at an
established time depending on the time
set by the user, after which the
appliance will switch off automatically.
For safety reasons, it is not possible to
set the end of cooking time by itself
without setting the cooking duration.
1. After selecting a cooking function and
temperature, press the
The indicator light
2. Turn the temperature knob to set the cooking
time (from 1 minute to 13 hours) (e.g. "25
minutes").
3. Press the
button.
The indicator light
4. Turn the temperature knob to set the end-of-
cooking time (e.g. "13:15").
914779671/D
key.
flashes on the display.
flashes on the display.
5. Press the
button to confirm end-of-
cooking time.
6. Press the
button to start the function.
The appliance waits for the set start time.
The minutes required for preheating are
already included in the end-of-cooking
time.
At the end of the cooking process an acoustic
signal sounds and the display shows
7. Return the function knob to the 0 position.
To delete a programmed cooking
1. Press the
button for a few seconds.
The indicator light
display.
2. Press the key
flashes on the display.
3. Turn the temperature knob counter-
clockwise until the cooking time is reset.
4. Press the
button to confirm.
In this way, only the programmed
cooking is cancelled. Timed cooking
starts immediately with the preheating
phase.
To stop every cooking process, always
return the function knob to the 0
position.
Minute minder timing during a cooking
process
The minute minder timer does not stop
the cooking operation but rather informs
the user when the set time has run out.
1. Press the
button. The indicator light
flashes on the display.
1. Press the
button. The display shows
and the indicator light
flashing.
2. Turn the temperature knob to set the duration
of the minute minder (from 1 minute to 13
hours).
flashes on the
shortly. The indicator light
USE - 71
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sop6102s2ps

Table of Contents