Smeg SOP6102S2PN Manual page 16

2 Turn the temperature knob to the right or to
the left to select the wished temperature (for
example "200°C").
3. Press the button to start the function.
When the door is opened, the function
in progress is interrupted.
The function resumes automatically
when the door is closed.
Preheating stage
Cooking itself is preceded by a preheating
stage, which allows the appliance to heat to the
cooking temperature more quickly.
This stage is indicated by the switching on of the
indicator light and by a progressive
increase in the temperature level reached
.
You can skip the preheating phase by
holding down the
seconds.
At the end of preheating:
• the indicator light switches off;
• the appliance beeps;
• the words
button flash to indicate that the food can be
introduced into the oven cavity.
Cooking phase
1. Open the door
2. Place the dish with the food to be cooked
into the oven cavity.
3. Close the door.
• If the dish with the food is already inside the
oven cavity, press the
cooking.
70 - USE
button for a few
and the
or
button to start
4. Check the cooking status of the food by
turning on the internal light.
End of cooking
5. To end cooking, turn the function knob to
position 0 to exit the function.
Timed cooking
Timed cooking is the function which
allows a cooking operation to be
started and then ended after a specific
length of time set by the user.
1. After selecting a cooking function and
temperature, press the
The indicator light
2. Turn the temperature knob to set the cooking
time (from 1 minute to 13 hours) (e.g. "25
minutes").
3. Press the button to modify the cooking
duration.
Bear in mind that a few minutes for oven
preheating must be added to the
cooking time.
4. Press the button to start the function.
At the end of preheating:
5. Place the food inside the oven cavity.
6. Press the button to start cooking.
Timed cooking is indicated by the progressive
decrease in time on the numerical display and
the progressive decrease in the segment bar
.
At the end of the cooking process an acoustic
signal sounds and the display shows
7. Return the function knob to the 0 position.
key.
flashes on the display.
914779671/D
.