Westinghouse WLE622WA User Manual page 8

INSTALLATION
WARNING
CAUTION
5mm clearance min.
Installation dimensions
WARNING
WARNING
Installers responsibility
In ALL cases the anti-tilt bracket MUST be securely
anchored to the floor with suitable fasteners, and the
stability bolt fixed.
The anti-tilt bracket is a mandatory safety restraint.
In order to prevent accidental tipping of the appliance;
for example by a child climbing onto the open door,
the anti-tilt bracket supplied with the cooker MUST be
installed. ALWAYS ensure that the cooker is located so
that the anti-tilt bracket is engaged into the cooker.
The unit must be pushed up against the wall on
installation. On gas units check that the gas hose,
if used, has not been kinked during installation.
8
INSTALLATION
5mm clearance min.
596mm
Step 1: Positioning
Choose the most practical bracket mounting option for
your cooker. The anti-tilt bracket can be floor mounted or
floor and skirting mounted depending on the location of
the range plug/socket/connection.
Step 2: Fixing anti-tilt bracket
Position the anti-tilt bracket so that it will fully engage
into the slot at the rear of the cooker. The bracket is
mounted centrally at the rear of the cooker. Anchor the
bracket into position using appropriate fasteners.
3 fasteners
3 Fasteners
Minimum
A A
Detail A
Detail A