Westinghouse WLE622WA User Manual page 11

INSTALLATION
Replacing the oven door
(To be done by qualified personnel only)
Procedure to assemble the door
Procedure to assemble the door
(to be done by
1. Hold door with both hands.
(to be done by personnel only)
Procedure to assemble the door
2. Locate both hinges into the frame slots
(to be done by
at the same time.
Frame slot
Frame slot
Frame slot
Hinge
Hinge
Hinge
Notch
Notch
Notch
1. Hold door with both
1. Hold door with both
1. Hold door with both hands.
hands and locate both
1. Hold door with both hands.
hands and locate both
1. Hold door with both
hinges into the frame slots
3. Ensure that the location notch drops into frame slot.
hinges into the frame slots
1. Hold door with both hands.
hands and locate both
2. Locate both hinges into the frame slots at the
at the same time.
Care should be taken not to damage other parts of
2. Locate both hinges into the frame slots at the
at the same time.
hinges into the frame slots
same time. the cooker.
same time.
2. Locate both hinges into the frame slots at the
at the same time.
same time.
Frame slot
Frame slot
Frame slot
Hinge
Hinge
Frame slot
Hinge
Notch
Notch
Hinge
Notch
Notch
Procedure to assemble the door (to be done by qualified personnel only).
personnel only)
Procedure to assemble the door (to be done by qualified personnel only).
Procedure to assemble the door (to be done by qualified personnel only).
personnel only)
4. Open door fully and rotate stirrups away from you,
and back to their original position.
Frame slot
Frame slot
Frame slot
Hinge
Hinge
Hinge
4. Open door fully and rotate stirrups away from
Notch
4. Open door fully and rotate stirrups away from
Notch
5. Close the door fully.
you back to their original position.
you back to their original position.
4. Open door fully and rotate stirrups away from
Notch
Service fuse location – models with powerpoint only
2. Ensure that the location notch drops into the you back to their original position.
2. Ensure that the location notch drops into the
5. Close the door fully.
5. Close the door fully.
frame slot.
This product is fitted with a power outlet at each end
2. Ensure that the location notch drops into the
Care should be taken not to damage other
5. Close the door fully.
of the control panel. The outlets are protected by a
Care should be taken not to damage other
frame slot.
parts of the cooker.
replaceable high breaking capacity 15 amp fuse located at
parts of the cooker.
Care should be taken not to damage other
the rear of the product.
parts of the cooker.
WARNING
WARNING
4. Close the door fully.
4. Close the door fully.
Before servicing the fuse, ensure that all power to
4. Close the door fully.
product is switched off.
To access fuse, unscrew fuse housing and remove from
appliance. (See diagram).
frame slot.
Fuse
Fuse housing
11
INSTALLATION