Page 1
USB to Serial-Value Quick Installation Guide Introduction The USB to Serial-Value adds one 9-pin RS232 serial port to USB-equipped computer systems. Key Features and Benefits • Compliant with USB specification, revision 1.1 • RoHS compliant Serial Number Sticker For future product return or exchange, this serial number is required.
Page 2
System Requirements • USB equipped computer with an available USB port • Windows 8 (32-/64-bit) / 7 (32-/64-bit) / ® Vista (32-/64-bit) / XP (32-/64-bit) / Server 2003 & 2008 (32-/64-bit) / Server 2008 R2 / 2000 Package Contents • USB to Serial-Value •...
Page 3
Driver Installation Make sure the driver is installed Before plugging the USB to Serial-Value into the computer. Windows 8 (32-/64-bit) / 7 (32-/64-bit) / Server 2008 R2 Insert the driver CD. At the AutoPlay box: Click Open folder to view files, then double click Setup. If AutoPlay doesn't start: Click Windows key and R, type D:\setup.exe, then click OK.
Page 4
Windows Vista (32-/64-bit) Insert the driver CD. At the CD autoplay window: Double click Setup. If the CD doesn't auto-start: Click Start, in the Start Search box, type D:\setup.exe, then press Enter. (Change D: to match your CD-ROM drive letter) At the User Account Control, click Allow.
Page 5
Click Next, then Finish. Plug the USB to Serial-Value into a USB port and the driver will install automatically. Restart Windows to complete the installation. Windows XP (32-/64-bit) / Server 2003 (32- /64-bit) / 2000 Insert the driver CD. Click Start, Run, type D:\setup.exe, then click OK.
Page 6
To Verify Windows Installation Check Device Manager verify installation. For Windows 8 / 7 / Server 2008 R2: Right click Computer, click Manage. For Windows Vista: Right click Computer, click Manage, click Continue. For Server 2008: Right click Computer, click Manage, double click Diagnostics.
Page 7
Go to www.siig.com, click Support, then REQUEST A PRODUCT REPLACEMENT to submit a request to SIIG RMA or fax a request to 510-657-5962. Your RMA request will be processed, if the product is determined to be defective, an RMA number will be issued.
Page 8
Fremont, CA 94538-3152, USA Phone: 510-657-8688 USB to Serial-Value is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. All other names used in this publication are for identification only and may be trademarks of their respective owners.
Need help?
Do you have a question about the JU-000061-S1 and is the answer not in the manual?
Questions and answers