SIIG JU-NE0B11-S1 Quick Start Manual

Usb 3.0 to sfp gigabit ethernet adapter

Dear Valued Customer

(JUST WANTED YOU TO KNOW)

WE REALLY

APPRECIATE

YOUR PURCHASE

~thank you~

Features

• Supports IEEE 802.3az-2010

• Integrated 1000Mbps SX/LX transceiver

• Supports CDC-ECM

• Supports LPM (Link Power Management)

• Supports pair swap/polarity/skew correction

• Supports power down/link down power saving

• Supports hardware CRC

(Cyclic Redundancy Check) function

• SuperSpeed USB 3.0 ensures high performance

packet transfer rate

• Features full duplex with flow control and

half duplex with back pressure operation

1. An available USB 3.0 type-A port

2. Windows® 10 / 8.1 / 7 (32-/64-bit)

3. Windows® Server 2019 to 2008 R2 (32-/64-bit)

4. Mac OS X® 10.15 to 10.6

Table of Contents

Do you have a question about the JU-NE0B11-S1 and is the answer not in the manual?

Page 1 Features • Supports IEEE 802.3az-2010 • Integrated 1000Mbps SX/LX transceiver Dear Valued Customer • Supports CDC-ECM • Supports LPM (Link Power Management) (JUST WANTED YOU TO KNOW) • Supports pair swap/polarity/skew correction WE REALLY • Supports power down/link down power saving •...
Page 2 Installation If your system has the built-in driver can use directly. driver install is not necessary. Support For more info or tech support http://www.siig.com/support 04-1257A P/N: JU-NE0B11-S1 Nov, 2019 Copyright © 2019 by SIIG, Inc. All rights reserved.