•
The Call Log button light shows the current status as follows:
Off: No incoming call, or you have already viewed the call log.
Red on: You have missed calls to view.
•
If your call is answered by another extension, the caller's information is recorded in the logs
of both your extension and the answering extension.
•
You can lock your call log display by using an extension PIN (Personal Identification Number),
so that you can prohibit access to your logged information. Refer to "3.1.2 Personal
Programming".
•
You can also have a Call Log button for an ICD Group (Incoming Call Distribution Group).
•
If a call arrives while you are using the call log, the call log display will be replaced with the
caller's information.
•
PS user: Refer to "Operating Instructions" for PS.
•
Caller information received with a call waiting tone from the telephone company will not be
logged in the call log.
Customizing Your Phone
•
3.1.4 Customizing the Buttons
Create or edit a Call Log button or Call Log for ICD Group button.
1.4.2 Call Log, Outgoing
You can redial using the outgoing call log.
To call
KX-NT300/KX-DT300/KX-T7600
While on-hook
Press Left.
Press Up or Down
until desired number
appears.
To call with the REDIAL button
Display PT
While on-hook
REDIAL
Press REDIAL to
display the outgoing
call log.*
•
* System programming is required for this operation.
•
This operation is available only for digital proprietary telephones with a display.
Document Version 2008-10
Off-hook.
REDIAL
Press REDIAL
until desired number
appears.
Off-hook.
1.4.2 Call Log, Outgoing
Operating Manual
143