Call Log, Outgoing - Panasonic NCP500 Operating Manual

1.4.2 Call Log, Outgoing

To clear the log information
Display PT
While viewing the log information
(Call Log)
OR
Press Call Log, or Up or Down
until desired party appears.
To call
Display PT
While viewing the log information
(Call Log)
OR
Press Call Log, or Up or Down
until desired party appears.
•
The Call Log button light shows the current status as follows:
Off: No incoming call, or you have already viewed the call log.
Red on: You have missed calls to view.
•
If your call is answered by another extension, the caller's information is recorded in the logs
of both your extension and the answering extension.
•
You can lock your call log display by using an extension PIN (Personal Identification Number),
so that you can prohibit access to your logged information. Refer to "3.1.2 Personal
Programming".
•
You can also have a Call Log button for an ICD Group (Incoming Call Distribution Group).
•
If a call arrives while you are using the call log, the call log display will be replaced with the
caller's information.
•
PS user: Refer to "Operating Instructions" for the PS.
•
KX-NT400 user: Refer to "Operating Instructions" for the KX-NT400.
•
Caller information received with a call waiting tone from the telephone company will not be
logged in the call log.
Customizing Your Phone
•
3.1.4 Customizing the Buttons
Create or edit a Call Log button or Call Log for ICD Group button.
1.4.2 Call Log, Outgoing
You can redial using the outgoing call log.
146 Operating Manual
TRANSFER
Press TRANSFER.
Off-hook.
Document Version 2009-11