Precautions For Use; Installation; Setting The Clock - Hyundai RTCC632SURIP Instruction Manual

Stereo 3cd/mp3 mini hi-fi system with pll radio cassette turntble and usb/sd encoding
Table of Contents

Advertisement

Available languages

Available languages

Caution:
Usage of controls or adjustments or performance of procedures other than those specified here-
in may result in hazardous radiation exposure.
this unit should not be adjusted or repaired by anyone except qualified service personnel.
Important:
Since movement of the CD mechanism and the sensitive circuity may cause interference to the
radio TUNER nearby, switch this unit OFF while operating other radio devices.
Due to the complexity of muc control, please un-plug the main power supply of the unit if
found the unit hang up during operation!
this is not a malfunction of the system!

PRECAUTIONS FOR USE

INSTALLATION

unpack all parts and remove protective material.
do not connect the unit to the mains before checking the main voltage and before all other
connections have been made.
do not cover any vents and make sure that there is a space of several centimeters around the
unit for ventilation.
CONNECTION
1)
connect the power cord (37) to AC outlet.
2)
when you first plug the unit into the mains, the unit will go into standby mode.
3)
connect the speaker wire to the speaker terminal (34) located ON the rear side of the unit.
4)
turn ON the power (7) and select "CD" FUNCTION by pressing " FUNCTION " button (10) .
if the LCD display (2) is ON with backlighting, it means the power supply is normal. now the
system is ready to PLAy the music.

SETTING THE CLOCK

1)
set unit in standby mode.
2)
press the "TIMER/CLK-ADJ" button (4), the display will show " 12h " or " 24h ", then press
the pre-up 5 (27) or pre-down 6 (13) button to select the appropiated hour format (12 hour
or 24 hour). press the "TIMER/CLK-ADJ" button (4) to confirm.
3)
press pre-up 5 (27) or pre-down 6 (13) button to set the correct hour.
4)
press the skip down 9 (12) or skip up : (26) button to set the correct minutes.
5)
press "TIMER/CLK-ADJ" button (4)to store the correct hour.
the pre-set time will be re-set completely if dis-connecting the main power supply. you
are recommended to switch the system into standby mode for convenience usage.
ENG - 48

Advertisement

Table of Contents
loading

Table of Contents