Table of Contents
Advertisement
OpERATIng InSTRuCTIOnS
Read the EnTIRE IMpORTAnT
SAFETY InFORMATIOn
section at the beginning of this
manual including all text under
subheadings therein before set up
or use of this product.
1.
Charge the Battery Pack (18) and insert
it in the tool, as described in the previous
section.
2.
Select an appropriate bit or attachment
for the job. Insert the bit or attachment as
described in the previous section.
3.
The LED Lighted Collar light may be
turned on by moving the switch on the
collar.
Figure 10
4. Rotate the Switch (8) to the ON position.
nOTE: This is a variable speed switch.
The tool bit speed is dependent on the
position of the Switch. Use a speed
appropriate to the bit and the material
being worked on. In general, harder
materials require faster speeds and softer
materials require slower speeds. Relative
speeds are indicated by the numbers on
the Switch.
5.
Apply the tool bit to the work material as
needed.
6.
When the task has been completed, stop
the tool by rotating the Switch (8) to the
OFF ("O") position. If the LED Collar
light is ON, switch it OFF. Unplug the
rechargeable battery. Remove the bit or
attachment as discussed in the previous
section.
Page 12
For technical questions, please call 1-800-444-3353.
7.
Store the tool, its battery, and its bits and
attachments in their case in a safe location.
8.
Dispose of used batteries properly.
Consult your local hazardous waste
authority for disposal guidelines.
SKU 92880
Hide quick links:
Advertisement
Table of Contents
