Extension Cords - Chicago Electric 92880 Set Up And Operating Instructions Manual

7. To reduce vibration, maintain the tool
as explained in this manual. If any
abnormal vibration occurs, stop use
immediately.
SAVE ThESE InSTRuCTIOnS.
grounding
InCORRECT gROunDIng WIRE
COnnECTIOn:
Check with a qualified electrician
if you are in doubt as to whether
the outlet is properly grounded.
Do not modify the power cord
plug provided with the tool.
never remove the grounding
prong from the plug. Do not use
the tool if the power cord or plug
is damaged. If damaged, have it
repaired by a service facility
before use. If the plug will not fit
the outlet, have a proper outlet
installed by a qualified
electrician.
Double Insulated Tools: Tools with Two
prong plugs
Outlets for 2-prong plug
1. Tools marked "Double Insulated" do not
require grounding. They have a special
double insulation system which satisfies
OSHA requirements and complies with
the applicable standards of Underwriters
REV 10e
SKU 92880
TO pREVEnT
ELECTRIC ShOCK
AnD DEATh FROM
For technical questions, please call 1-800-444-3353.
Laboratories, Inc., the Canadian
Standard Association, and the National
Electrical Code.
2. Double insulated tools may be used in
either of the 120 volt outlets shown in the
preceding illustration. (See Outlets for
2-prong plug.)

Extension Cords

note: Extension cords must not be used
with this item's charger.
Symbology
Double Insulated
Canadian Standards Association
Underwriters Laboratories, Inc.
V~
Volts Alternating Current
A
Amperes
No Load Revolutions per Minute
n 0 xxxx/min.
(RPM)
Page 7