Table of Contents
Advertisement
Damaged accessories will normally
break apart during this test time.
7.
Wear personal protective equipment.
Depending on application, use face
shield, safety goggles or safety
glasses. As appropriate, wear dust
mask, hearing protectors, gloves
and workshop apron capable of
stopping small abrasive or work piece
fragments. The eye protection must
be capable of stopping flying debris
generated by various operations.
The eye protection must be capable
of stopping flying debris generated by
various operations. The dust mask or
respirator must be capable of filtering out
particles generated by your operation.
Prolonged exposure to high intensity
noise may cause hearing loss.
8.
Keep bystanders a safe distance away
from work area. Anyone entering
the work area must wear personal
protective equipment. Fragments of
work piece or of a broken accessory
may fly away and cause injury beyond
immediate area of operation.
9.
never lay the power tool down until
the accessory has come to a complete
stop. The spinning accessory may grab
the surface and pull the power tool out of
your control.
10.
Do not run the power tool while
carrying it at your side. Accidental
contact with the spinning accessory
could snag your clothing, pulling the
accessory into your body.
11.
Regularly clean the power tool's air
vents. The motor's fan will draw the
dust inside the housing and excessive
accumulation of powdered metal may
cause electrical hazards.
REV 10e
SKU 92880
For technical questions, please call 1-800-444-3353.
12.
Do not operate the power tool near
flammable materials. Sparks could
ignite these materials.
13.
Do not use accessories that require
liquid coolants. Using water or other
liquid coolants may result in electrocution
or shock.
14.
Maintain labels and nameplates on
the tool. These carry important safety
information. If unreadable or missing,
contact Harbor Freight Tools for a
replacement.
Avoid unintentional starting.
15.
to begin work before turning on the tool.
16.
Do not depress the spindle lock when
starting or during operation.
17.
use clamps (not included) or other
practical ways to secure and support
the workpiece to a stable platform.
Holding the work by hand or against your
body is unstable and may lead to loss of
control and personal injury.
18.
The battery charger gets
hot during use. The
charger's heat can build up to
unsafe levels and create a fire
hazard if it does not receive adequate
ventilation, due to an electrical fault, or if
it is used in a hot environment. Do not
place the charger on a flammable
surface. Do not obstruct any vents on
the charger. Especially avoid placing
the charger on carpets and rugs; they
are not only flammable, but they also
obstruct vents under the charger.
19.
This product is not a toy.
of reach of children.
20.
people with pacemakers should
consult their physician(s) before
use. Electromagnetic fields in close
proximity to heart pacemaker could
Prepare
Keep it out
Page 5
Hide quick links:
Advertisement
Table of Contents
